ETB fuel level gauges can be made to match the VDO Dip-pipe range of fuel level sensors. The empty resistance varies depending on the length of the VDO dip-pipe sensor between 60 and 90 Ohms. The resistance at full varies between approximately 2 to 5 Ohms.
If you are not ordering a VDO dip-pipe sensor at the same time as our gauge or if you already have one, please specify either the length of VDO dip-pipe sensor that you have or the resistance in Ohms when the fuel tank is empty.
The gauge is supplied a 'U'-shaped fixing bracket and thumb nuts along with a 12v /2w illumination bulb. Night illumination is classic white.
The gauge size of 52mm denotes the outer diameter of the main body of the instrument and hence a 53mm to 54mm diameter hole is required in the dashboard.